Case

SG-B800 Metal Deburring Machine To Ireland

Metal Deburring Machine To Ireland (Double Belt Magnetic Bed)

This metal deburring machine to Ireland is used to remove residues, burrs, product scratches, and floating rust on the surface of the workpiece after punching, cutting, laser, flame, etc., , to improve the surface of the workpiece, unify the corresponding texture, and increase the aesthetics of the workpiece surface at the same time.

Clients’ production process and requirements:

The sheet metal after laser cutting, necessary to remove floating rust on the surface of flat parts and remove metal burrs after cutting. Metal Deburring and Finishing Machine SG-B800, the structure of the equipment is two sets of abrasive belts, magnetic conveyor bed and six sets of pressure rollers, which can ensure that the minimum 30*30 carbon steel workpieces pass smoothly, and at the same time, for non-carbon steel pieces, Such as: aluminum, SUS, copper, plastic and other flat workpieces for drawing (the length of non-carbon steel parts should be greater than 280mm)

Deburring Parts After Laser Cutting Or Punching

Features:

Abrasive belt automatic deviation correction device
High temperature and high damping wear-resistant conveyor belt
The main rubber roller of the abrasive belt is universalon front and rear
The conveying speed can be adjusted
M15 controls the lift
Magnetic conveying + pressure roller

Main Configuration Brands

Motor：Litian, China
Low voltage appliances：Schneider/Siemens
Frequency converter：Xinjie, China
Pneumatic Components：Airtac, Taiwan
Control button：Tayee, China
Controller：M15S
Bearing：SKF/NSK

3KW Wet Vacuum Cleaner

In order to ensure the timely and effective collection and treatment of floating dust generated during processing, the deburring equipment must be equipped with dust removal equipment during normal use. The machine is equipped with 3KW wet dust removal equipment as standard. The efficiency should reach 98%.

Metal Deburring Machine To Ireland Specification

SG-B800 main specification:
Processing width	≤800mm	Belt size	1910mm×800mm
Min. machining parts	50×50mm(carbon steel)	Dust suction air volume	4000m³/hour
Processing thickness	0.3~80mm	Total power	Around 20.87KW
Feeding speed	0.5~6m/min(Frequency	Working height	900±30mm
Belt rubber roller	2pcs	Overall dimension	L2000 W1500 H1930
Grinding consumables	double belt	Weight	2.3T（about）
		Belt size	1910MM×800MM

Name	Size	Qty	Use
conveyor	4200*800	1	For feeding
Belt main rubber wheel	Ф200(oil resistance, high temperature resistance)	2	For grinding
Main roller motor	7.5KW -4P YE3	2	Belt Motor Power
Conveyor geared motor	RV90-80-1.5	1	For transmission
lift motor	WPDX30-60	1	for lifting power
conveyor bed lift	Stroke 80mm	4	for conveyor bed lifting
M15 Meter	Italy M15S	1	for conveyor bed lift control
Belt correction cylinder	ACQ50	2	For automatic deflection correction of abrasive belts
Belt Tensioning Cylinder	ACQ80*30	2	For belt tensioning