20x3000mm 3 roller plate bending roll

20x3000 3 Roller Plate Bending Roll For Sale

SC Machinery W11S upper roller universal 20×3000 3 roller plate bending roll machine is used to make sheet plate into different sharps such as cylindrical form, conic form and arc, it adopted Japan hydraulic technical.

Top roll can do vertical and level motion, up and down motion, the position display on the screen. This machine includes pre-bending function.

The down roll fix the height, so material can easily enter the machine and workers operate machine expediently.

20x3000 3 Roller Plate Bending Roll Main Structure

The Upper Roll

Upper roll device composed of main cylinder, upper bearing pedestal, upper roll, double self-aligning bearing. Two cylinders provide the pressure for upper roll bending. Main cylinder working pressure is 20 Mpa, max pressure of upper roll multiply 0.8 times to compensate for pre-bending. Upper roll ends fit with double row self-aligning roll bearing to reduce the friction and motor power. The material of upper roll is 42CrMo, after completion of multiple processes such as forging, tempering, quenching, tempering, stress relieving and precision lathe machining (Note: According to the user’s different needs, the processing procedure of the roll is different); Strictly ensure that the working roll surface strength is high in the rolling plate, the surface of the roll is free from indentation and can meet the requirements of long-term rolled steel plate. Heat treatment is HB250-280, HRC 40-45.

upper roller of 3 roller plate bending machine
down roll and level motion device of 3 roller plate bending roll

Bottom Roll And Level Motion Device

The material of bottom roll is 45#, heat treatment is HB250-280. It composed of bottom roll, bottom roll bearing pedestal, bottom roll input gear, glide bearing. Bottom bearing adopt SF-2 oil glide bearing.

Level motion motor supply the power, through the strap drive to worm wheel and pole speed reducer. Upper roll level motion drove by worm wheel and pole to finish bending in dis-symmetry form.

Support Device

20×3000 3 roller plate bending roll support deviced is composed of sloping block device, support device, support roll bearing pedestal, support lifting device, support roll can adjust up and down. The adjustment depend on plate specification. The material of support is 45# , heat treatment is HB190-220, it made up in helix sharp to protect the surface.

support device of 3 roller plate bending machine
main driven device of 3 roller plate rolling machine

Main Driven Device

Main driven device of a 3 roller plate bending roll is composed of motor, hard gear speed reducer, output gear, main motor can tuning in two direction and provide bending pitch of strand.

Overturn Device

Composed of ram, bearing, tuning cylinder.

tuning device of 3 roller plate bending machine
lubricate device of 3 roller plate bending roll

Lubricate Device

Composed of lubricate pipe and lubricate pipe attachment, adopted GB7323-1994 NO 2 lithium grease.

Hydraulic System

Composed of Y series motor, gear pump, valves, oil tank, pipe and so on.

Max pressure is 20  Mpa,  testing  pressure  is  24  Mpa,  pressure  adjusted  by overflow valve, system working pressure 0-19 MPa, normal pressure is 15Mpa. The valves is adopted from Taiwan.

Electricity System

Composed of electrical box, operation table, manual button. The power is 380V/50Hz/3PH, it is adopted PLC control system code with longevity easily operate. Whole bending process can read from the indicator setting on the control box.

Technical Parameter

                       Specifications

Unit

W11S-20x3000

Upper roller adding pressure

T

190

Max width of rolling plate

mm

3000

The length of working roller

mm

3050

Max thickness of rolling plate

mm

T20*B3000*φmin950

(σs≤245 MPa)

Max thickness of pre-bending

mm

T16*B3000*φmin950

(σs≤245 MPa)

Upper roller diameter

mm

Φ380

Bottom roller diameter

mm

Φ220

Distance between two bottom rollers

mm

360

Rolling speed

m/min

about 4

Main motor

kw

22

Hydraulic motor

kw

7.5

Moving motor

kw

4

 

Number of support roller

set

1

piece

4

Request Informations

Can you pls tell us your plate thickness and length? Our sales will recommend machine model for you.

en_USEnglish